APC Smart Ups (Smt), 1500Va, Iec(8), Usb, Serial, Smart Slot, LCD, Tower, 3Yr Wty

• Peace of mind that comes with full equipment compatibility and reliability of a leader - Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
• Smarter productivity with ability to tailor to your specific application needs - Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
• Avoids costly power problems by keeping your IT equipment and data safe and available - Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems

• Power conditioning - Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
• Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.

• USB connectivity - Provides management of the UPS via a USB port (not available on all models).
• Disconnected battery notification - Warns when a battery is not available to provide backup power.
• Serial connectivity - Provides management of the UPS via a serial port.
• LED status indicators - Quickly understand unit and power status with visual indicators.

• Predictive failure notification - Provides early-warning fault analysis ensuring proactive component replacement.
• Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Specifications

Output

• Output power capacity
  1.0 KWatts / 1.5 kVA
• Max Configurable Power (Watts)
  1.0 KWatts / 1.5 kVA
• Nominal Output Voltage
  230V
• Output Voltage Note
  Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion
  Less than 5% at full load
• Output Frequency (sync to mains)
  47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
• Other Output Voltages
  220, 240
• Topology
  Line Interactive
• Waveform type
  Sine wave
• Output Connections
  (2) IEC Jumpers (Battery Backup)
  (8) IEC 320 C13 (Battery Backup)

Input

• Nominal Input Voltage
  230V
• Input frequency
  50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections
  IEC-320 C14
• Cord Length
  1.83meters
• Input voltage range for main operations
  160 - 286V
• Input voltage adjustable range for mains operation
  151 - 302V
• Number of Power Cords
  1
• Other Input Voltages
  220, 240

Batteries & Runtime

• Battery type
  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time
  3hour(s)
• Replacement Battery
  RBC7
• Expected Battery Life (years)
  3 - 5
• RBC Quantity
  1
• Runtime
  View Runtime Graph
  View Runtime Chart
• Efficiency
  View Efficiency Graph

Communications & Management

• Interface Port(s)
  SmartSlot , USB
• Control panel
  Multi-function LCD status and control console
• Audible Alarm
  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
• Emergency Power Off (EPO)
  --
• Available SmartSlot™ Interface Quantity
  1

Surge Protection and Filtering

• Surge energy rating
  459Joules
• Filtering
  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

• Maximum Height
  219mm , 21.9CM
• Maximum Width
  171mm , 17.1CM
• Maximum Depth
  439mm , 43.9CM
• Net Weight
  24.09KG
• Shipping weight
  27.23KG
• Shipping Height
  376mm , 37.6CM
• Shipping Width
  328mm , 32.8CM
• Shipping Depth
  595mm , 59.5CM
• Color
  Black
• Units per Pallet
  12.0

Environmental

• Operating Temperature
  0 - 40 °C
• Operating Relative Humidity
  0 - 95 %
• Operating Elevation
  0-3000meters
• Storage Temperature
  -15 - 45 °C
• Storage Relative Humidity
  0 - 95 %
• Storage Elevation
  0-15000meters
• Audible noise at 1 meter from surface of unit
  45.0dBA
• Online thermal dissipation
  135.0BTU/hr

Conformance

• Approvals
  CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, UL 1778, VDE
• Standard warranty
  3 years repair or replace (excluding battery) and 2 year for battery