Overview
High density, double-conversion on-line power protection with scalable runtime
Includes : CD with software , Documentation CD , Installation guide , Rack Mounting brackets , Rack mounting hardware , Rack Mounting support rails , Temperature Probe , USB cable , Warranty card , Web/SNMP Management Card
-
10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connection
-
Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Adaptability
-
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
-
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
-
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
Serviceability
-
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.
Availability
-
Scalable runtimeAllows additional run time to be quickly added as needed.
-
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Manageability
-
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
-
Network manageableProvides remote power management of the UPS over the network.
-
LED status indicatorsQuickly understand unit and power status with visual indicators.
Marketing Features
-
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Protection
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Tech Specs
GENERAL | |
Device Type | UPS - rack-mountable |
Height (Rack Units) | 6U |
Colour | Black |
BATTERY | |
Technology | Lead Acid |
Run Time (Up To) | 5.3 min at full load 14.8 min at half load |
Recharge Time | 3 hours |
Features | Maintenance free, sealed, leak-proof |
NETWORKING | |
Remote Management Interface | Ethernet 10/100, USB |
EXPANSION / CONNECTIVITY | |
Interfaces | 1 x management (Ethernet) - RJ-45 1 x management (USB) - 4 pin USB Type B 1 x EPO (emergency power off) 1 x serial - RJ-45 |
Expansion Slots | 1 (total) / 1 (free) x SmartSlot |
MISCELLANEOUS | |
Features | Audible alarm, LCD display |
Compliant Standards | C-Tick, VDE, IEC 60950, EN 50091-2, RoHS, EN 50091-1, REACH, EN 62040-2, IP20, EAC |
MANUFACTURER WARRANTY | |
Service & Support | Limited warranty - 3 years Limited warranty - batteries - 2 years |
ENVIRONMENTAL PARAMETERS | |
Min Operating Temperature | 0 C |
Max Operating Temperature | 40 C |
Humidity Range Operating | 0 - 95% (non-condensing) |
Sound Emission | 55 dBA |
DIMENSIONS & WEIGHT | |
Width | 43.2 cm |
Depth | 71.5 cm |
Height | 26.3 cm |
Weight | 111.82 kg |
DIMENSIONS & WEIGHT (SHIPPING) | |
Shipping Width | 60 cm |
Shipping Depth | 1 m |
Shipping Height | 46.1 cm |
Shipping Weight | 130 kg |
POWER DEVICE | |
UPS Technology | On-line |
Input Voltage | AC 230 V |
Frequency Provided | 50/60 Hz |
Frequency Required | 45 - 65 Hz |
Input Connectors | Hardwire 5-wire (3PH + N + G), hardwire 3-wire (1PH + N + G) |
Power Output Connectors Details | 6 x power IEC 60320 C13 4 x power IEC 60320 C19 1 x hardwire 3-wire (HN + G) 3 x IEC connector |
Output Voltage | AC 230 V 3% - 50/60 Hz |
Power Capacity | 8000 Watt / 8000 VA |
Output Waveform | Sinewave |
Surge Suppression | Yes |
Surge Energy Rating | 480 Joules |
Efficiency | 98% |