APC (Suvtp20Kh3B4S) Smart-Ups Vt 20Kva 400V W/3 Batt Mod >4, Sup 5X8, Int Maint Bps, P-Cap

by APC
Sold out


APC Smart-UPS VT 20kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
  • Parallel-capacity capable
    Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

Smart-UPS VT Features & Benefits

  • Frequency and voltage regulation
    Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Safety-agency approved
    Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • LCD display
    Alpha-Numeric Display which displays system parameters and alarms.
  • InfraStruXure Manager Compatible
    Enables centralized management via the APC InfraStruXure Manager.
  • Generator compatible
    Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Scalable runtime
    Allows additional run time to be quickly added as needed.
  • Dual mains input
    Increases availability by allowing the UPS to be connected to two separate power sources.
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Shippable with modules installed
    Enables pre-installation UPS staging and testing and faster installation.

Marketing Features

  • Manual maintenance bypass
    Reduces installation costs by eliminating the need for an external mechanical bypass.
  • Network manageable
    Provides remote power management of the UPS over the network.
  • Input power factor correction
    Minimizes installation costs by enabling the use of smaller generators and cabling.

Tech Specifications


  • Output power capacity
    16.0 KWatts / 20.0 kVA
  • Max Configurable Power (Watts)
    16.0 KWatts / 20.0 kVA
  • Nominal Output Voltage
    400V 3PH
  • Output Voltage Note
    Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
  • Efficiency at Full Load
    95.3 %
  • Output Voltage Distortion
    Less than 5% at full load
  • Output Frequency (sync to mains)
    47 - 53 Hz for 50 Hz nominal
  • Output Frequency (not synced)
    50Hz +/- 0.1% for 50Hz nominal
  • Other Output Voltages
    380, 415
  • Load Crest Factor
    3 : 1
  • Topology
    Double Conversion Online
  • Waveform type
    Sine wave
  • Maximum Output Current
  • Bypass
    Built-in Maintenance Bypass, Built-in Static Bypass


  • Nominal Input Voltage
    400V 3PH
  • Input frequency
    40 - 70 Hz (auto sensing)
  • Input Connections
    Hard Wire 5-wire (3PH + N + G)
  • Input voltage range for main operations
    304 - 477V
  • Efficiency at Full Load
    95.3 %
  • Other Input Voltages
    380, 415
  • Maximum Input Current
  • Input Power Factor at Full Load

Batteries & Runtime

  • Battery type
  • Included Battery Modules
  • Typical recharge time
  • Nominal Battery Voltage
    +/-192 V (split battery referenced to neutral)
  • Battery Slots Empty
  • Expected Battery Life (years)
    3 - 5
  • RBC Quantity
  • Extendable Run Time
  • Extended Run Options
  • End of Discharge Battery Voltage
    +/-154 V

Communications & Management

  • Interface Port(s)
    DB-9 RS-232 , Smart-Slot
  • Pre-Installed SmartSlot™ Cards
  • Control panel
    Multi-function LCD status and control console
  • Audible Alarm
    Audible and visible alarms prioritized by severity
  • Emergency Power Off (EPO)


  • Maximum Height
    1490mm , 149.0CM
  • Maximum Width
    523mm , 52.3CM
  • Maximum Depth
    842mm , 84.2CM
  • Net Weight
  • Shipping weight
  • Shipping Height
    1643mm , 164.3CM
  • Shipping Width
    650mm , 65.0CM
  • Shipping Depth
    1062mm , 106.2CM
  • Color
  • Units per Pallet

      You recently viewed

      Clear recently viewed