APC Smart-UPS SRT 10000VA RM 230V
High density, double-conversion on-line power protection with scalable runtime
Smart-UPS On-Line Features & Benefits
Marketing Features
-
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
-
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Protection
-
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.
-
Cold-start capableProvides temporary battery power when the utility power is out.
-
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
-
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
-
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
-
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
-
Scalable runtimeAllows additional run time to be quickly added as needed.
SPECIFICATIONS
Output
-
Output power capacity10.0 KWatts / 10.0 kVA
-
Max Configurable Power (Watts)10.0 KWatts / 10.0 kVA
-
Nominal Output Voltage230V
-
Output Voltage DistortionLess than 2%
-
Output Frequency (sync to mains)50/60Hz +/- 3 Hz
-
Other Output Voltages220, 240
-
Load Crest Factor3 : 1
-
TopologyDouble Conversion Online
-
Waveform typeSine wave
-
Output Connections(3) IEC Jumpers (Battery Backup)(6) IEC 320 C13 (Battery Backup)(1) Hard Wire 3-wire (H N + G) (Battery Backup)(4) IEC 320 C19 (Battery Backup)
-
BypassInternal Bypass (Automatic and Manual)
Input
-
Nominal Input Voltage230V , 400V 3PH
-
Input frequency40 - 70 Hz (auto sensing)
-
Input ConnectionsHard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
-
Input voltage range for main operations160 - 275V
-
Input voltage adjustable range for mains operation100 - 275 (half load), 173 - 476 (half load)V
-
Other Input Voltages220, 240, 380, 415
Batteries & Runtime
-
Battery typeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time1.5hour(s)
-
Replacement BatteryAPCRBC140
-
Expected Battery Life (years)3 - 5
-
RBC Quantity2
-
Extendable Run Time1
-
Extended Run OptionsAPC-Smart-UPS-SRT-10000VA-RM-230V
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
-
Control panelMulti-function LCD status and control console
-
Audible AlarmAudible and visible alarms prioritized by severity
-
Emergency Power Off (EPO)Yes
-
Available SmartSlot™ Interface Quantity1
Surge Protection and Filtering
-
Surge energy rating480Joules
Physical
-
Maximum Height263mm , 26.3CM
-
Maximum Width432mm , 43.2CM
-
Maximum Depth715mm , 71.5CM
-
Rack Height6U
-
Net Weight111.82KG
-
Shipping weight130.0KG
-
Shipping Height461mm , 46.1CM
-
Shipping Width600mm , 60.0CM
-
Shipping Depth1000mm , 100.0CM
-
ColorBlack