HP Aruba Ap-303H (Rw) Unified Ap

by HPE
$772.20
$410.95
SKU JY678A

Summary

This access point combines wireless and wired access in a single compact device. It’s ideal for hotels, medical clinics, classrooms, branch offices and remote workstations which often require flexible and easy deployment options.

Get a big performance advantage

Patented ClientMatch™ technology improves performance and eliminates sticky client behavior while roaming.

Protect service quality over the air

AppRF technology enables prioritization and policy enforcement for business-critical enterprise apps like Microsoft Lync. 

Specifications:

AP-303H ACCESS POINT SPECIFICATIONS
  • Unified dual-radio 802.11ac Wave 2 2x2:2 hospitality and branch AP with internal antennas, three local Gigabit Ethernet ports, PoE out and USB host interface
  • Supports wall-box and desk mount deployments
WI-FI RADIO SPECIFICATIONS
  • AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO1
  • Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1)
  • 5GHz: Two spatial stream Multi User (MU) MIMO for up to 867Mbps wireless data rate to up to two (1x1 VHT80) MU-MIMO capable client devices simultaneously
  • 5GHz: Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2x2 VHT80 client devices
  • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 300Mbps wireless data rate to individual 2x2 HT40 client devices
  • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835GHz
    • 5.150 to 5.250GHz
    • 5.250 to 5.350GHz
    • 5.470 to 5.725GHz
    • 5.725 to 5.850GHz
  • Available channels: Dependent on configured regulatory domain
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (conducted) transmit power (limited by local regulatory requirements):
    • 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)
    • 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20MHz, 40MHz and 80MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
WI-FI ANTENNAS
  • Two integrated dual-band moderately directional antennas for 2x2 MIMO with maximum individual antenna gain of 4.2dBi in 2.4GHz and 5.6dBi in 5GHz. Built-in antennas are optimized for vertical orientation of the AP. The horizontal beamwidth is roughly 120 degrees.
    • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.4dBi in 2.4GHz and 4.5dBi in 5GHz.
OTHER INTERFACES
  • Uplink: 10/100/1000BASE-T Ethernet (RJ-45, back)
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
    • PoE-PD (input): 48 Vdc (nominal) 802.3af/at PoE
  • Local: Three 10/100/1000BASE-T Ethernet (RJ-45, bottom)
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
    • One port: PoE-PSE (output): 48 Vdc (nominal) 802.3af PoE
  • Passive pass-through interface (two RJ-45, back and bottom)
    • Bluetooth Low Energy (BLE) radio
      • Up to 4dBm transmit power (class 2) and -93dBm receive sensitivity
      • Integrated antenna with moderately directional pattern and peak gain of 0.9dBi
  • USB 2.0 host interface (Type A connector)
    • 3G/4G cellular modems
    • Device battery charging port
    • Capable of supplying up to 1A/5 watts of power to an attached device
  • DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
  • Visual indicators (LEDs):
    • Power/system status
    • Radio status
    • PoE-PSE status
    • Local network port status (3x)
  • Reset/LED control button (“paperclip access”)
    • Factory reset (when activated during device power up)
    • LED control: toggle off/normal
  • Serial console interface (custom, uUSB physical jack)
1 256-QAM modulation (802.11ac) supported by the 2.4GHz radio as well.
  • MOUNTING
    • The AP ships with a mounting plate to attach the AP to a single-gang wall-box (most international variations covered). A security screw (T8H) is provided to ensure that the AP cannot (easily) be removed from its mount without a specialized tool.
    • Several optional mount kits are available to attach the AP to a dual-gang wall-box, directly to the wall, or to support desk mounting.
    MECHANICAL
    • AP-303H
      Dimensions/weight (unit, including single-gang wall box mount plate):
      • 86mm (W) x 40mm (D) x 150mm (H)
      • 350g
    • Dimensions/weight (shipping):
      • 128mm (W) x 63mm (D) x 168mm (H)
      • 470g
    • AP-303HR
      Dimensions/weight (unit, including desk mount and power cord):
      • 86mm (W) x 40mm (D) x 150mm(H)
      • 430g
    • Dimensions/weight (shipping):
      • 293mm (W) x 137mm (D) x 93mm (H)
      • 790g
    REGULATORY MODEL NUMBER
    • AP-303H-xx (all variants): APINH303
    CERTIFICATIONS
    • CB Scheme Safety, cTUVus
    • UL2043 plenum rating
    • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
    WARRANTY
    Aruba limited lifetime warranty

 

You recently viewed

Clear recently viewed