HP Aruba Iap-325 (Rw) Instant 4X4:4 11Ac Ap

by HPE
$2,198.90
$1,173.95
SKU JW325A

Descriptions

  • Ultra-fast 320 series 802.11ac Wave 2 APs offer the highest performance in high-density environments and can be managed by a Mobility Controller or deployed in controllerless Aruba Instant mode.

    These Wave 2 access points deliver multi-user MIMO (MU-MIMO) aware ClientMatch to boost network efficiency and support the growing device density demands on your network.

Boost network efficiency

With multi-user MIMO (MU-MIMO), you can transmit to multiple Wave 2 clients from an AP, at the same time.

    ClientMatch unleashes MU-MIMO

    Aruba ClientMatch software groups Wave 2 clients together, enabling MU-MIMO. That means a faster, more efficient network.

      Integrated Bluetooth Beacon

      320 series APs have an integrated BLE Beacon to simplify management of a large-scale network of battery-powered Aruba Beacons.
       

      Specifications

      AP-320 SERIES SPECIFICATIONS
      • AP-325 and IAP-325
        • 5 GHz (1,733 Mbps max rate) and 2.4 GHz (600 Mbps max rate) radios, each with 4x4 MIMO support and a total of eight integrated omni-directional downtilt antennas
      WIRELESS RADIO SPECIFICATIONS
      • AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n 4x4 MIMO.
      • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1).
      • Four spatial stream SU-MIMO for up to 1,733 Mbps wireless data rate to a single client device.
      • Three spatial stream MU-MIMO for up to 1,300 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously.
      • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio.
      • Supported frequency bands (country-specific restrictions apply):
        • 2.400 to 2.4835 GHz
        • 5.150 to 5.250 GHz
        • 5.250 to 5.350 GHz
        • 5.470 to 5.725 GHz
        • 5.725 to 5.850 GHz
      • Available channels: Dependent on configured regulatory domain.
      • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.
      • Supported radio technologies:
        • 802.11b: Direct-sequence spread-spectrum (DSSS)
        • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
      • Supported modulation types:
        • 802.11b: BPSK, QPSK, CCK
        • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
      • Transmit power: Configurable in increments of 0.5 dBm
      • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
        • 2.4 GHz band: +24 dBm (18 dBm per chain)
        • 5 GHz band: +24 dBm (18 dBm per chain)
        • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
      • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.
      POWER
      • Maximum (worst-case) power consumption: 20W (802.3at PoE), 13.5W (802.3af PoE) or 18.5W (DC)
        • Excludes power consumed by external USB device (and internal overhead); this could add up to 6W (POE) or 5.5W (DC) for 5W/1A USB device
      • Maximum (worst-case) power consumption in idle mode: 8W (PoE) or 7W (DC).
      • Direct DC source: 48Vdc nominal, +/- 5%.
      • Power over Ethernet (PoE): 12 Vdc (nominal) 802.3af/802.3at compliant source
        • Unrestricted functionality with 802.3at PoE
        • Power-save mode with reduced functionality from 802.3af PoE
      • USB port disabled
      • Second Ethernet port disabled
      • 2.4 GHz radio in 1x1:1 mode
      • Power sources sold separately
      • When both power sources are available, DC power takes priority
      WI-FI ANTENNAS

      • AP-325/IAP-325:
        • Eight integrated downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 5.0 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling-mounted orientation of the AP. The downtilt angle for maximum gain is ~ 30 degrees.
      OTHER INTERFACES
      • Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
        • Auto-sensing link speed and MDI/MDX
        • Load balancing support to achieve platform throughput greater than 1 Gbps
        • 802.3az Energy Efficient Ethernet (EEE)
        • PoE-PD: 48 Vdc (nominal) 802.3af or 802.3at PoE
      • DC power interface, accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length
      • USB 2.0 host interface (Type A connector)
      • Bluetooth Low Energy (BLE) radio
        • Up to 4dBm transmit power (class 2) and -94dBm receive sensitivity
        • Integrated antenna, -5dBi gain (30 degree downtilt)
        • Can be disabled with configuration
      • Visual indicators (tri-color LEDs): For system and radio status
      • Reset button: Factory reset (during device power up)
      • Serial console interface (RJ-45)
      • Kensington security slot
        • MOUNTING
          • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
          • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details
          MECHANICAL
          • Dimensions/weight (unit, excluding mount accessories):
            • 203 mm (W) x 203 mm (D) x 57 mm (H), 8.0” (W) x 8.0” (D) x 2.2” (H)
            • 950 g/34 oz
          • Dimensions/weight (shipping):
            • 315 mm (W) x 265 mm (D) x 100 mm (H), 12.4” (W) x 10.4” (D) x 3.9” (H)
            • 1,350 g/48 oz
          WARRANTY
          Aruba limited lifetime warranty
          MINIMUM SOFTWARE VERSIONS

       

      You recently viewed

      Clear recently viewed