Overview
The HPE 10500 switch series sets a benchmark for performance, reliability, and scalability with next-generation Clos architecture. Designed for enterprise campus core networks, the 10500 switch series enables a cloud-connected and rich-media-capable infrastructure. The switch series provides industry-leading 10GbE/40GbE/100GbE port density, 3-microsecond latency, and very low energy consumption.With Hewlett Packard Enterprise (HPE) Intelligent Resilient Framework (IRF) technology, the scalability and resiliency of the 10500 switch series can be extended and virtualized across up to 4 chassis with a single management interface - enabling flatter, more agile networks.
This switch series, along with the entire HPE FlexNetwork architecture, can be seamlessly managed through the HPE Intelligent Management Center (IMC), which provides a single-pane-of-glass management view of the infrastructure.
Tech Specs
- Device Type
- Switch - 48 ports - L3 - managed
- Enclosure Type
- Rack-mountable 1U
- Subtype
- 10 Gigabit Ethernet
- Ports
- 48 x 1 Gigabit SFP/ 10 Gigabit SFP+
- Capacity
- Virtual interfaces (VLANs) per port for 802.1q: 4096 ¦ IPv4 routing table entries: 256000 ¦ IPv6 routing table entries: 64000
- MAC Address Table Size
- 256K entries
- Jumbo Frame Support
- 9000 bytes
- Routing Protocol
- EGP, BGP-4, IS-IS, RIP-1, RIP-2, IGMPv2, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, IGMPv3, GRE, OSPFv3, Multiprotocol BGP, MSDP, static IPv4 routing, static IPv6 routing, ECMP, RIPng, MLD, MPLS, BGP+
- Remote Management Protocol
- SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, TFTP, SSH, SSH-2, CLI
- Encryption Algorithm
- MD5, AES, IKE, TLS, PEAP, TTLS, TKIP, WEP
- Authentication Method
- Secure Shell (SSH), RADIUS, CHAP, TACACS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
- Features
- Flow control, ARP support, auto-uplink (auto MDI/MDI-X), port mirroring, Intrusion Detection System (IDS), Weighted Round Robin (WRR) queuing, Deep Packet Inspection (DPI), Non-Stop Forwarding (NSF), Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Per-VLAN Spanning Tree Plus (PVST+), Device Link Detection Protocol (DLDP) support, Unicast Reverse Path Forwarding (URPF), Smart Link Pass-Through, DHCP protection, port isolation, packet storm protection, Class of Service (CoS), Strict Priority (SP), Loopback, Intelligent Resilient Framework Technology (IRF), Network Quality Analyzer (NQA), Multicast Border Gateway Protocol (MBGP), GARP VLAN Registration Protocol (GVRP), MACsec support, Virtual Private LAN Service (VPLS), IP source guard, Bridge protocol data unit (BPDU), Virtual Extensible LAN (VXLAN), Label Distribution Protocol (LDP)
- Compliant Standards
- IEEE 802.3, IEEE 802.3z, IEEE 802.1D, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.1AX
- RAM
- 2 GB SDRAM
- Flash Memory
- 512 MB
- Interfaces
- 48 x Gigabit / 10Gbit LAN SFP+
- Power Device
- Internal power supply
- Voltage Required
- (50/60 Hz)
