HP 2530-8G-Poe+ Switch, Layer2, 8 X Gig + 2 X Sfp Ports, Managed, Life Wty

by HPE
$1,148.40
$614.95
SKU J9774A

  Features

Quality of Service (QoS)

  • Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
  • Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.
  • Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
  • Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
  • Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers

Management

  • Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
  • Virtual stacking: provides single IP address management for up to 16 switches
  • sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
  • IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications
  • Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated

Connectivity

  • IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
  • IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
  • IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)
  • Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports
  • Pre-standard PoE support: detects and provides power to pre-standard PoE devices

Layer 2 switching

  • VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
  • Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed
  • 16K MAC address table: provides access to many Layer 2 devices
  • GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
 

SPECIFICATIONS

Ports

  • 8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+);Media Type: Auto-MDIX;Duplex: 10BASE-T/100BASE-TX: half or full
  • 1000BASE-T: full only
  • 2 dual-personality ports;each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T
  • IEEE 802.3u Type 100Base-Tx
  • IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers)
  • 1 dual-personality (RJ-45 or USB micro-B) serial console port

Memory and processor

  • Processor : ARM9E @ 800 MHz, 128 MB flash, packet buffer size: 1.5 MB dynamically allocated, 256 MB DDR3 DIMM

Latency

  • 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets)
  • 1000 Mb Latency: < 2.6 µs (LIFO 64-byte packets)

Throughput

  • up to 14.8 million pps (64-byte packets)

Switching capacity

  • 20 Gb/s

PoE capability

  • 67 W

Management features

  • IMC - Intelligent Management Center
  • command-line interface
  • Web browser
  • configuration menu
  • out-of-band management (serial RS-232C or Micro USB)
  • IEEE 802.3 Ethernet MIB
  • Repeater MIB
  • Ethernet Interface MIB

POWER AND OPERATING REQUIREMENTS 

Power consumption

  • 86 W (maximum), 13.4 W (standby)

Input voltage

  • 100-127/200-240 VAC

Operating temperature range

  • 0 to 45°C

Operating humidity range

  • 15 to 95% @ 104°F (40°C) (noncondensing)

Heat dissipation

  • 65 BTU/hr (68.58 kJ/hr)

DIMENSIONS AND WEIGHT 

Minimum dimensions (W x D x H)

  • 25.4 x 15.95 x 4.45 cm

Weight

  • 1 kg

WHAT'S INCLUDED?

Differentiator

  • The HP 2530-8G-PoE+ Switch is a fully managed layer 2 switch with 8 10/100/1000 PoE+ ports and 2 dual personality ports. 

What's in the box

  • (1) HP 2530-8G-PoE+ Switch 

Warranty

  • Limited Lifetime

You recently viewed

Clear recently viewed